ProductsExpressFabStoneCabinetMetallater(208) 590-7702
Start free trial
Help / Jobs

Drawings and approvals

Some things have to come back approved before a job is cut: the layout and seams on a stone job, and shop drawings, submittals, questions to the architect (RFIs) and finish samples on a cabinet job. Drawings and approvals keeps track of each one, so nobody builds from a drawing that wasn't approved.

Send one

  1. Open the job.
  2. In Drawings and approvals, click the kind to add, for example Add shop drawing.
  3. Type what it covers, who it goes to and the day you need it back.
  4. Click Add it. To attach the drawing itself, click File on its line.

When the answer comes back

  1. Click Record the answer on its line.
  2. Pick Approved, Approved as noted or Revise and resubmit, and type any notes.
  3. Click Record it. If it was sent back, the next revision (B, then C) is added for you. Click Mark sent when it goes out again.

Release to the floor. A shop drawing that's approved shows Release to the floor. Click it when the shop may start. Until then the job says Not ready to cut, and moving it into production asks first.

Approvals (under Production) lists everything that's out for an answer across every job, longest wait first. Click Late to see what's past its day. Anything late also shows on the Radar.

The customer can approve on their own page. A layout, a shop drawing or a finish sample that's out with the customer shows on their page under Needs your OK, with any file you attached. They click Approve, or Ask for a change and type what they want. Their answer lands on the job exactly as if you'd recorded it, and the office gets a message either way. Questions to the architect and submittals don't show on the customer's page.

Ed reads the spec. On a cabinet or millwork job, Ed can read the architect's spec section and set up the paperwork for you:

  1. Open the job.
  2. In Project details, click Ed, read the spec and pick the spec (a PDF, a photo, or a text file).
  3. Ed lists what it found: the quality grade and whether the job is certified, the questions to send before you price, the submittals the spec requires, the finishes, and what to price.
  4. Untick anything you don't want.
  5. Click Put these on the job.

The grade and the finishes go on the job. The questions and the submittals land in Drawings and approvals marked Not sent, ready for you to send. The spec is filed in the job's folder. Ed only lists what the spec says, so read the spec yourself before you price from it. In the sample shop, a PDF shows a sample result. A text file is really read.

This is the manual that's inside the app, where every screen also has Ed to ask. Still stuck? Contact support.