Layout files for slab layout software
If you lay out slabs in a separate program, to match veins and place seams on a photo of the slab, you trade files with it here. The drawing goes out. The finished layout comes back.
Send a job out
- Open the job.
- Find the Layout file card.
- Click Send to layout software.
- Click Download the DXF. This is the drawing: each top, each backsplash strip, the finished edges and the seams, in inches.
- Click Download the sheet. This is the job sheet: the job, the customer, the material, the thickness and each piece's size.
- Open the DXF in your layout software.
Cutouts are on the job sheet, not in the drawing. The drawing knows how many sinks and cooktops there are, not where each one sits. Place them in the layout software from your own sink and cooktop templates.
A seam is drawn wherever two pieces touch. Move it in the layout software if the stone calls for it.
Bring the finished layout back
- In the layout software, export the finished layout as a DXF.
- Open the job.
- On the Layout file card, click Bring back the finished layout.
- Pick the file.
- Look at the list of layers. Next to each one, pick what it holds: Pieces to cut, Remnants, The slab, Seams or Leave it out. The first guess comes from the layer's name. Your answers are remembered, so you do this once.
- Read the green or amber line. Green means the square feet in the layout match the job. Amber means they don't, and says by how much. Look for a missing or an extra piece before it goes to the saw.
- Untick any remnant that isn't worth keeping.
- Click Keep this layout.
What happens next:
- The file is kept in the job's folder as the cut file.
- The job shows the yield: square feet cut over square feet of slab.
- Each remnant waits on the job, marked After the cut. Once its slab is marked cut, click Save to inventory, then Print its tag. It goes in with its true area and its share of the slab's cost. A remnant never shows in inventory before the slab is cut, so nobody sells a piece that isn't on the rack yet.
Your layer names Settings, Connections, Slab layout software. Type the layer names your layout software is set up for, and the height of a backsplash strip. The same card is in Setup, under Your machines. If you don't know the names yet, leave them. Nothing breaks: a layout that comes back shows you its own layers and asks.
What this is and isn't
- You move the files yourself: download here, open there, bring the result back. Nothing reaches into a folder on your shop's network.
- It is a plain DXF, the kind slab layout programs such as Slabsmith open and save. It has not yet been run against every program, so check the first job by eye.
- Vein matching happens in the layout software, on the photo of the slab. What travels in the file is where the seams are.
This is the manual that's inside the app, where every screen also has Ed to ask. Still stuck? Contact support.